Polygel for extensions Poly Gel №4

POLY GEL is a modern product based on a combination of acrylic and gel, which combines the strength of acrylic and the elasticity of gel.

Features of POLY GEL from LUNAmoon:

• Suitable for strengthening, restoration and extension, creating three-dimensional designs and working with upper forms.
• It is easy to apply, does not flow or float from the temperature of your hands.
• Ideal for creating nude finishes and statement jackets.
• You can work with 4 nails at once - the material is static and holds its shape well.
• Suitable for customers prone to allergies.
• Suitable for working in the “sawdust-free” technique using upper molds.
• It is harder than POLY GEL with glitter, and requires control of the thickness and evenness of the material application to avoid transparent areas and cracks.
• It is easy to dust: it does not clog the file, does not scatter across the table, and the dust settles evenly down.
• The wavelength for polymerization is 365-405 nm.
• UV/Led lamp power 36-48W.
• Full polymerization 120 seconds.
• An innovative product for craftsmen who work with creative forms and building complex architecture.

Recommendations:

• It is most convenient to spread with an orange stick.
• We recommend removing the sticky layer before sawing.

Insemination method:

POLY GEL STRENGTHENING

1. Withdrawal.
2. We do not file the nail shape or leave it 2 mm long, which we will remove after leveling.
3. Use a 220-grit file to file the nail without applying strong pressure from above, lifting the scales of the nail plate, or use a 100-grit buff.
4. Let's do a manicure.
5. If we work with removers, we wash our hands with soap after working with them.
6. We degrease the nail using Nail Prep LUNAmoon in two approaches. The first approach is to wipe the surface of the nail with a napkin. The second approach is to place the napkin on an orange stick and wipe the cuticle and sinus area.
7. We use primer as desired.
8. Apply the Rubber Base LUNAmoon base coat with a flat gel brush using rubbing movements.
9. We paint all the sinuses of the nail, dry in the lamp for 60 seconds.
10. We erase the stickiness.
11. We spread the polygel and level it.
12. If we work close to the cuticle, leave a 0.5–1 mm gap and dry in the lamp for 120 seconds.
13. After laying out, file the shape. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
    If the nail was thin, it may curl, so be sure to cut 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
14. After sawing, we erase the sticky layer.
15. Cover with gel polish if the design requires it. Dry for 60 seconds.
16. Cover with a top coat, dry for 120 seconds. After drying, do not wipe with anything to avoid losing shine.

POLY GEL EXTENSIONS

1. Withdrawal.
2. We shorten the length of the nail to 1 mm and form a round shape.
3. Use a 220-grit file to file without applying too much pressure or use a 100-grit buff.
4. Let's do a manicure.
5. If we work with removers, we wash our hands with soap after working with them.
6. We degrease the nail using Nail Prep LUNAmoon in two approaches. The first approach is to wipe the surface. The second approach is to clean the cuticle and sinus area with an orange stick and a napkin.
7. We use LUNAmoon primer .
8. Apply the Rubber Base LUNAmoon undercoat with a flat brush and rub in. Outline the sinuses and dry for 60 seconds.
9. We erase the stickiness.
10. We install the upper form with the desired architecture and length.
11. Spread POLY GEL into the mold, apply to the nail and press. Dry in the lamp for 120 seconds.
12. We remove the form.
13. File the shape. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
    If the nail was thin, it may curl, so be sure to cut 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
14. We wipe off the sticky layer and excess dust after sawing.
15. If necessary, apply Rubber Base to the areas where the saw was. Let dry for 30 seconds.
16. Cover with gel polish if the design requires it. Dry for 60 seconds.
17. Cover with top coat. Dry for 120 seconds. After drying, do not wipe with anything to maintain the shine.

POLY GEL from LUNAmoon is the freedom to create any shapes and designs without restrictions!

Shelf life: 24 months. Store opened for no more than 18 months.

(Product photos on the website may differ from the actual product)