Liquid Gel Light Acrygel №69

Liquid Light Acrygel is an innovative material for strengthening, leveling, and extending nails. 
Light Acrygel is a symbiosis of polygel and base. It consists of more than half (60-80%) acrylic copolymer, the main component of polygel, and a small amount of hydroxyethyl methacrylate HEMA (about 20-30%), the main component of base coatings. 
It can completely replace the base. 

Features:

• Wavelength for polymerization: 365-405 nm. 
• UV/Led lamp power: 36-48W.
• Permissible coating thickness: 0.5 mm at the edge / 1 mm at the apex. 
• Acid-free, medium consistency. 
• Medium pigmentation, covers the free edge. 
• Full polymerization in 120 seconds. 
• Suitable only for nail strengthening and extension. 
• Has good shock absorption.
• When using this gel for reinforcement, it is necessary to file the natural nail. 
• Requires an underlay of Rubber Base LUNAmoon.
• It can be additionally heated to make the gel thinner. 

Application method:

STRENGTHENING:

1. Removal.
2. Don’t file the nail shape. Alternatively, leave spare 2 mm in length, which will be filed and removed after leveling.
3. Use a 220 grit file to gently file the nail from the top, lifting any nail plate flakes. Alternatively, use a 100 grit buffer.
4. Manicure.
5. If you use removers, wash your hands with soap and water after use.
6. Degrease the nail with Nail Prep LUNAmoon. Two approaches are needed. Use 4 wipes. One wipe for 5 fingers. The first approach - wipe the nail surface, the second approach - take an orangewood stick, wrap it with a wipe, and wipe everything in the cuticle area and in the nail folds.
7. Apply Ultrabond from LUNAmoon (optional). Before application, it's important to wipe the brush on a lint-free cloth to remove excess. Apply Ultrabond to all five fingers (free edge and side parallels) with a semi-dry brush. Wait for 1 minute for the bond to absorb into the nail.
8. Underlay with Rubber Base LUNAmoon. Best applied with a flat gel brush. Strokes should be rubbing. It is important to outline all nail recesses. Cure for 60 seconds.
9. Remove stickiness. Alignment. I want to emphasize that when leveling with gel, it's necessary to create a distance from the cuticle of 0.5-1 mm. Cure in the lamp for 60 seconds.
10. Buff the form after leveling. This is necessary to create thickness at the edge to support the free edge.
11. Dust off the forms after leveling. This is necessary in order to create a trickness at the end that will hold the free edge.
12. After filing, remove the tackiness.
13. Apply gel polish if needed.
14. Apply top coat and cure for 120 seconds. After curing, don’t wipe anything off, as it may dull the shine.

CLASSIC NAIL EXTENSION:

1. Removal.
2. Trim the nail length to 1 mm and shape into a round form.
3. Use a 220 grit file to gently file the nail from the top, lifting any nail plate flakes. Alternatively, use a 100 grit buffer.
4. Manicure.
5. I If you use removers, wash your hands with soap and water after use.
6. Degrease the nail with Nail Prep LUNAmoon. Two approaches are needed. Use 4 wipes. One wipe for 5 fingers. The first approach - wipe the nail surface, the second approach - take an orangewood stick, wrap it with a wipe, and wipe everything in the cuticle area and in the nail folds.
7. Apply Lunamoon Primer.
8. Underlay with Rubber Base LUNAmoon. Best applied with a flat gel brush. Strokes should be rubbing. It is important to outline all nail recesses. Cure for 60 seconds.
9. Remove stickiness.
10. Apply nail form for extension of the free edge.
11. Fill the nail form with clear gel for artificial nail. Cure for 30 seconds.
12. File the free edge and shape as needed.
13. Wipe off the tackiness and excess dust.
14. Apply another layer of Rubber Base to areas that were filed. Cure for 30 seconds.
15. Smooth out with gel, place in the lamp, and press for 10-15 seconds. If the gel is very tacky or contains glitter, press for 20 seconds.
16. Cure in the lamp for 120 seconds.
17. Before applying gel polish, wipe off the tackiness.
18. Apply top coat and cure for 120 seconds. After curing, don’t wipe anything off, as it may dull the shine.

(Product images on the website may differ from the actual product)