Carbide cutter "Herringbone" blue 4.1mm

The carbide cutter "Herringbone" with a blue notch has a conical shape, which provides convenience and makes it easy to work in hard-to-reach areas. Thanks to the cross-shaped notch, it removes material evenly, without vibrations and discomfort for the client. Each cutter undergoes a collet centering test, which guarantees smooth operation and durability in use.

The cutter is made of high-quality tungsten carbide, a material that is particularly strong, wear-resistant and long-lasting. The nail plate does not heat up when removing the material.

Features:

• Shape: cone;
• Purpose: removing artificial coating, nail correction, arch trimming;
• Suitable for removing soft, hard and hybrid coatings;
• Smooth running and uniform removal without overheating;
• Recommended RPM: 25,000–35,000, direction — Forward;
• Notch color: blue;
• Abrasiveness: medium, cross-shaped notch;
• Head length: 15.3 mm;
• Leg length: 34.8 mm;
• Working nozzle diameter: 2.3 mm;
• Diameter of the working part (middle): 4.1 mm.

Advantages:

1. wear resistance is 2–3 times higher than that of standard cutters, thanks to the tungsten carbide material and high sharpening quality;
2. does not darken after sterilization;
3. vibration-free operation, easy gliding;
4. does not get clogged with material, removes coating faster;
5. does not overheat the nail and does not cause burning;
6. removes without scratches;
7. does not magnetize dust;
8. has a sharp working tip for precise cutting.

Carbide cutter care:

• Mechanical cleaning after each use using a special brush.
• Soaking in a special solution for cleaning burs and cutters or cleaning in an ultrasonic cleaner.
• Compliance with the concentration of the disinfectant solution according to the instructions (exceeding the concentration destroys the material).
• Dry heat sterilization is possible only when the cutter is completely dry and at a temperature not exceeding 180°C.

​​​​​​​The shelf life is unlimited.
​​​​​​​(Product photos on the website may differ from the actual product)