Carbide milling cutter "Corn" thinned Soft Red (R) 4.0mm

Carbide milling cutter "Corn" thinned Soft Red (R) for right-handed people

The carbide cutter "Kuruzza" with a red notch has a thin shape, which ensures accurate and controlled removal of thin coatings. The fine cross-shaped notch works evenly, without vibrations and discomfort for the client, maintaining delicacy in sensitive areas. The model is designed for right-handed operation in the Forward direction and is suitable for intermediate correction. Each cutter undergoes a collet centering test, which guarantees smooth operation and durability.

The cutter is made of high-quality tungsten carbide, a durable and wear-resistant material. The nail plate does not heat up during operation, and the thin nose ensures safe work near the cuticle and side rollers.

Features:

• Shape: corn, thinned;
• Purpose: removal of artificial gel polish, nail correction;
• Suitable for removing thin coatings and intermediate correction;
• Smooth running and uniform removal without overheating;
• Soft, thin tip - delicate work near the cuticle and side rollers, as well as when filing the natural nail from the middle;
• Recommended RPM: 25,000–35,000, direction — Forward;
• Notch color: red;
• Abrasiveness: fine, cross-shaped notch;
• Head length: 13 mm;
• Leg length: 36 mm;
• Working nozzle diameter: 2 mm;
• Diameter of the working part (middle): 4 mm.

Advantages:

• wear resistance is 2–3 times higher than that of standard cutters, thanks to the tungsten carbide material and high sharpening quality;
• does not darken after sterilization;
• vibration-free operation, easy gliding;
• does not get clogged with material;
• does not overheat the nail and does not cause burning;
• removes without scratches;
• does not magnetize dust;
• thin working nozzle for precise and delicate work.

Carbide cutter care:

1. Mechanical cleaning after each use using a special brush.
2. Soaking in a special solution for cleaning burs and cutters or cleaning in an ultrasonic cleaner.
3. Compliance with the concentration of the disinfectant solution according to the instructions (exceeding the concentration destroys the material).
4. Dry heat sterilization is possible only when the cutter is completely dry and at a temperature not exceeding 180°C.

The shelf life is unlimited.
(Product photos on the website may differ from the actual product.)