Diamond cutter "Short flame" red 1.8mm

Diamond burr "Flame short" with a sharp nose, red notch 1.8 mm is intended for combined and hardware manicure, delicate treatment of the skin around the nail and proximal fold. Thanks to the soft abrasive, it provides gentle, controlled work, especially suitable for dry, thin and not very keratinized skin. The shorter burr head (6.5 mm) allows for more precise treatment of small areas and hard-to-reach areas.

Material: high-quality diamond coating for precise and long-lasting use.

Features:

• Shape: flame with a sharp nose;
• Purpose: combined and hardware manicure, skin and nail plate treatment;
• Abrasiveness: soft (red notch);
• Recommended RPM: 15,000–25,000;
• Head length: 6.5 mm (shorter than the Diamond Burr "Flame" with a sharp nose, red notch (1.8 mm) );
• Leg length: 36.5 mm;
• Diameter of the working part: 1.8 mm.

Advantages:

1. delicate treatment of the skin and nail plate;
2. accuracy thanks to a shorter head;
3. does not overheat the surface during operation;
4. The diamond coating does not wear off after disinfection and sterilization, which guarantees the durability of the cutter.

Caring for diamond burs:

• Cleaning after each use with a stiff-bristled brush (do not use brushes with metal bristles as they damage the diamond coating);
• Soaking in a special solution for cleaning cutters or processing in an ultrasonic cleaner;
• Compliance with the concentration of disinfectants (excess destroys the spraying);
• Sterilization in dry heat only in a dry state and at a temperature not higher than 180 °C.

The shelf life is unlimited.
​​​​​​​(Product photos on the website may differ from the actual product)